2011
1. In the circuit shown below, the Norton equivalent current in amperes with respect to the terminals P and Q is
a) 6.4 - j 4.8
b) 6.56 - j 7.87
c) 10 + j 0
d) 16 + j 0
2. In the circuit shown below, find the value of RL such that the power transferred to RL is maximum.
a) 5 ohms
b) 10 ohms
c) 15 ohms
d) 20 ohms
3. The circuit shown below is driven by a sinusoidal input Vi = Vpcos(t/RC). The steady state output Vo is
4. In the circuit shown below, the network N is described by the following Y matrix: The voltage gain V2/V1 is
a) 1/90
b) - 1/90
c) - 1/99
d) - 1/11
5. In the circuit shown below, the initial charge on the capacitor is 2.5 mC, with the voltage polarity as indicated. The switch is closed at time t = 0. The current i(t) at a time t after the switch is closed is
6. In the circuit shown below, the current I is equal to
No comments:
Post a Comment