2003
1. The impedance parameters Z11 and Z12 of the two port network in figure are
Solution : https://www.youtube.com/watch?v=v16OcXXl_8E
2004
2. For the lattice circuit shown in figure, Za = j2Ω and Zb = 2Ω. The values of the open circuit impedance parameters (Z-parameters) are
Solution : https://www.youtube.com/watch?v=Vn-O5Ll3CwU
2005
3. The ABCD parameters of an ideal n:1 transformer shown in figure are given below. The value of 'x' will be
a) n
b) 1/n
c) n2
d) 1/n2
Solution : https://www.youtube.com/watch?v=wjvAb6BEi9o
4. The h-parameters of the circuit shown in figure are
Solution : https://www.youtube.com/watch?v=lI92Vfd0F1o
2006
5. A two port network is represented by ABCD parameters as shown below. If port-2 is terminated by RL, the input impedance seen at port-1 is given by
Solution : https://www.youtube.com/watch?v=-emJQU9Qsx8
6. In the two port network shown in the figure below, Z12 and Z21 are respectively
Solution : https://www.youtube.com/watch?v=JFOPiiE7frs
2008
Statement for Linked Answer Questions: 7 & 8
A two port network shown below is excited by external DC sources. The voltages and the currents are measured with voltmeters V1, V2 and ammeters A1, A2 (all assumed to be ideal), as indicated. Under following switch conditions, the readings obtained are:
7. The Z-parameter matrix for this network is
8. The h-parameter network for this network is
Solution (7 & 8): https://www.youtube.com/watch?v=_-paorTBZZg
2010
9. For the two-port network shown below, the short-circuit admittance parameter matrix is
Solution : https://www.youtube.com/watch?v=IGYPN1wEH2I
2011
10. In the circuit shown below, the network N is described by the following Y matrix: The voltage gain V2/V1 is
a) 1/90
b) - 1/90
c) - 1/99
d) - 1/11
Solution : https://www.youtube.com/watch?v=nyPW45iQq2c
2012
Common Data for Questions 11 and 12:
With 10 volts DC connected at port A in the linear nonreciprocal two-port network shown below,
the following were observed:
(i) 1Ω connected at port B draws a current of 3 amps
(ii) 2.5Ω connected at port B draws a current of 2 amps
11. With 10 volts DC connected at port A, the current drawn by 7Ω connected at port B is
a) 3/7 A
b) 5/7 A
c) 1 A
d) 9/7 A
12. For the same network, with 6 volts DC connected at port A, 1Ω connected at port B draws 7/3 amp. If 8 volts DC is connected to port A, the open circuit voltage at port B is
a) 6 V
b) 7 V
c) 8 V
d) 9 V
Solution (11 & 12): https://www.youtube.com/watch?v=ghASFX3RYBA
2014
13. In the h – parameter model of 2 – port network given in the figure shown,
the value of h22 (in siemens) is _____________
Solution : https://www.youtube.com/watch?v=3xxsvowoMWc
14. For the two – port network shown in the figure,
the impedance (Z) matrix (in Ω) is
Solution : https://www.youtube.com/watch?v=eGw_ZeJwOec
2015
15. The 2 – port Admittance matrix of the circuit shown is given by____________
Solution : https://www.youtube.com/watch?v=jQZIEyucrjU
16. The ABCD parameters of the following 2 – port network are
Solution : https://www.youtube.com/watch?v=iIjMzXmILXk
1. The impedance parameters Z11 and Z12 of the two port network in figure are
2004
2. For the lattice circuit shown in figure, Za = j2Ω and Zb = 2Ω. The values of the open circuit impedance parameters (Z-parameters) are
2005
3. The ABCD parameters of an ideal n:1 transformer shown in figure are given below. The value of 'x' will be
a) n
b) 1/n
c) n2
d) 1/n2
4. The h-parameters of the circuit shown in figure are
2006
5. A two port network is represented by ABCD parameters as shown below. If port-2 is terminated by RL, the input impedance seen at port-1 is given by
6. In the two port network shown in the figure below, Z12 and Z21 are respectively
2008
Statement for Linked Answer Questions: 7 & 8
A two port network shown below is excited by external DC sources. The voltages and the currents are measured with voltmeters V1, V2 and ammeters A1, A2 (all assumed to be ideal), as indicated. Under following switch conditions, the readings obtained are:
7. The Z-parameter matrix for this network is
8. The h-parameter network for this network is
2010
9. For the two-port network shown below, the short-circuit admittance parameter matrix is
2011
10. In the circuit shown below, the network N is described by the following Y matrix: The voltage gain V2/V1 is
a) 1/90
b) - 1/90
c) - 1/99
d) - 1/11
2012
Common Data for Questions 11 and 12:
With 10 volts DC connected at port A in the linear nonreciprocal two-port network shown below,
the following were observed:
(i) 1Ω connected at port B draws a current of 3 amps
(ii) 2.5Ω connected at port B draws a current of 2 amps
11. With 10 volts DC connected at port A, the current drawn by 7Ω connected at port B is
a) 3/7 A
b) 5/7 A
c) 1 A
d) 9/7 A
12. For the same network, with 6 volts DC connected at port A, 1Ω connected at port B draws 7/3 amp. If 8 volts DC is connected to port A, the open circuit voltage at port B is
a) 6 V
b) 7 V
c) 8 V
d) 9 V
2014
13. In the h – parameter model of 2 – port network given in the figure shown,
the value of h22 (in siemens) is _____________
14. For the two – port network shown in the figure,
2015
15. The 2 – port Admittance matrix of the circuit shown is given by____________
16. The ABCD parameters of the following 2 – port network are
Given a video link for each question is very smart way of learning.i love it👍
ReplyDeleteI am very happy by visiting this site, its very helpful. And the link for solution is great idea, I love it....
ReplyDeleteVery nice question plz tell me 2019 two port Network question
ReplyDeleteHighly Appreciated
ReplyDeleteVery nice sir
ReplyDeleteSolution of each question is explain very smartly so no confusion left....Thank you for this
ReplyDeleteThanks a lot . This us very helpful
ReplyDeleteThankyou so much for this.
ReplyDeleteSir kindly update till 2020
ReplyDeleteHats off for the efforts! Thank youu soo soo much
ReplyDelete