GATE 2003 ECE Control Systems - Complete Video Solutions with Answers

GATE 2003

1. The Laplace transform of i(t) is given by I(s) = 2 / [s(1 + s)]. As t → ∞, the value of i(t) tends to

a) 0

b) 1

c) 2

d) ∞

Answer:C

Solution :    https://www.youtube.com/watch?v=DK3hqukI4co

2. Figure shows the Nyquist plot of the open loop transfer function G(s)H(s) of a system. If G(s)H(s) has one right hand pole, the closed loop system is

a) always stable

b) unstable with one closed loop right hand pole

c) unstable with two closed loop right hand poles

d) unstable with three closed loop right hand poles

Answer:A

Solution :    https://www.youtube.com/watch?v=DuipmIw_dtI

3. A PD controller is used to compensate a system. Compared to the uncompensated system, the compensated system has

a) a higher type number

b) reduced damping

c) higher noise amplification

d) larger transient overshoot

Answer:C

Solution :    https://www.youtube.com/watch?v=flVQh4IItX4

4. The driving point impedance Z(s) of a network has the pole-zero locations as shown in figure. If Z(0) = 3, then Z(s) is

Answer:B

Solution :   https://www.youtube.com/watch?v=VkjfxpWTPj4

5. The signal flow graph of a system is shown in figure. The transfer function C(s)/R(s) of the system is

Answer:D

Solution :   https://www.youtube.com/watch?v=UiYZch03Bsg

6. The root locus of the system G(s)H(s) = K / [s(s + 2)(s + 3)] has the break away point located at

a) (-0.5, 0)

b) (-2.548, 0)

c) (-4, 0)

d) (-0.748, 0)

Answer:D

Solution :   https://www.youtube.com/watch?v=f_IljSih2eU

7. The approximate Bode magnitude plot of a minimum phase system is shown in figure. The transfer function of the system is

Answer:A

Solution :   https://www.youtube.com/watch?v=BXoIP2em_cc

8. A second order system has the transfer function C(s)/R(s) = 4 / [s² + 4s + 4] with r(t) as the unit step function, the response c(t) of the system is represented by

Answer:B

Solution :   https://www.youtube.com/watch?v=-G7mdzB-60I

9. The gain margin and the phase margin of a feedback system with G(s)H(s) = s/(s + 100)³ are

a) 0 dB, 0^o

b) ∞, ∞

c) ∞, 0^o

d) 88.5 dB, ∞

Answer:B

Solution :   https://www.youtube.com/watch?v=n44i9T5koz4

10. The zero input response of a system given by the state space equation

Answer:C

Solution :    https://www.youtube.com/watch?v=BzTXlRJ5M9k