2003
7. The approximate Bode magnitude plot of a minimum phase system is shown in figure.
The transfer function of the system is
Solution :
https://www.youtube.com/watch?v=BXoIP2em_cc
2004
3. Consider the Bode magnitude plot shown in figure.
The transfer function H(s) is
Solution :
https://www.youtube.com/watch?v=0K0Ls-_nRDQ
6. A system has poles at 0.01 Hz, 1 Hz and 80 Hz; zeros at 5 Hz, 100 Hz and 200 Hz. The approximate phase of the system response at 20 Hz is
a) - 90o
b) 0o
c) 90o
d) - 180o
Solution :
https://www.youtube.com/watch?v=8SWwr0wlV0E
2006
3. Consider two transfer functions G1(s) = 1 / (s2 + as + b) and G2(s) = s / (s2 + as + b). The 3 dB bandwidths of their frequency responses are, respectively
Solution :
2007
7. The asymptotic Bode plot of a transfer function is as shown in figure.
The transfer function G(s) corresponding to this Bode plot is
Solution :
https://www.youtube.com/watch?v=fpM5ezwr90c
2008
7. The magnitude of frequency response of an under damped second order system is 5 at 0 rad/sec and peaks to 10/√3 at 5√2 rad/sec. The transfer function of the system is
Solution :
https://www.youtube.com/watch?v=3a4n-8XUFCg
2010
2. A system with transfer function Y(s)/X(s) = s/(s + p) has an output y(t) = cos(2t – π/3) for the input signal x(t) = p cos(2t – π/2). Then, the system parameter 'p' is
a) √3
b) 2/√3
c) 1
d) √3/2
Solution :
https://www.youtube.com/watch?v=3WAIkGRRes4
3. For the asymptotic bode magnitude plot shown below,
the system transfer function can be
Solution :
https://www.youtube.com/watch?v=Tt58Wfn-dsQ
2013
1. The Bode plot of a transfer function G(s) is shown in the figure below.
The gain (20log|G(s)|) is 32 dB and – 8 dB at 1 rad/sec and 10 rad/sec respectively. The phase is negative for all ω. Then G(s) is
a) 39.8/s
b) 39.8/s2
c) 32/s
d) 32/s2
Solution :
https://www.youtube.com/watch?v=YkPfY-Gufmg
2014
11. The Bode asymptotic magnitude plot of a minimum phase system is shown in the figure.
If the system is connected in a unity negative feedback configuration, the steady state error of the closed loop system, to a unit ramp input is _____________
Solution :
https://www.youtube.com/watch?v=fBTMa-Ql07A
18. In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all pole system?
a) – 80 dB/decade
b) – 40 dB/decade
c) + 40 dB/decade
d) + 80 dB/decade
Solution :
https://www.youtube.com/watch?v=bTwOnjuzVX8
2015
14. Consider the Bode plot shown in figure.
Assume that all the poles and zeros are real valued. The value of fH – fL (in Hertz) is ____________________
Solution :
https://www.youtube.com/watch?v=R95T4ztuNQo
7. The approximate Bode magnitude plot of a minimum phase system is shown in figure.
The transfer function of the system is
2004
3. Consider the Bode magnitude plot shown in figure.
The transfer function H(s) is
6. A system has poles at 0.01 Hz, 1 Hz and 80 Hz; zeros at 5 Hz, 100 Hz and 200 Hz. The approximate phase of the system response at 20 Hz is
a) - 90o
b) 0o
c) 90o
d) - 180o
2006
3. Consider two transfer functions G1(s) = 1 / (s2 + as + b) and G2(s) = s / (s2 + as + b). The 3 dB bandwidths of their frequency responses are, respectively
2007
7. The asymptotic Bode plot of a transfer function is as shown in figure.
The transfer function G(s) corresponding to this Bode plot is
2008
7. The magnitude of frequency response of an under damped second order system is 5 at 0 rad/sec and peaks to 10/√3 at 5√2 rad/sec. The transfer function of the system is
2010
2. A system with transfer function Y(s)/X(s) = s/(s + p) has an output y(t) = cos(2t – π/3) for the input signal x(t) = p cos(2t – π/2). Then, the system parameter 'p' is
a) √3
b) 2/√3
c) 1
d) √3/2
3. For the asymptotic bode magnitude plot shown below,
the system transfer function can be
2013
1. The Bode plot of a transfer function G(s) is shown in the figure below.
The gain (20log|G(s)|) is 32 dB and – 8 dB at 1 rad/sec and 10 rad/sec respectively. The phase is negative for all ω. Then G(s) is
a) 39.8/s
b) 39.8/s2
c) 32/s
d) 32/s2
2014
11. The Bode asymptotic magnitude plot of a minimum phase system is shown in the figure.
If the system is connected in a unity negative feedback configuration, the steady state error of the closed loop system, to a unit ramp input is _____________
18. In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all pole system?
a) – 80 dB/decade
b) – 40 dB/decade
c) + 40 dB/decade
d) + 80 dB/decade
2015
14. Consider the Bode plot shown in figure.
Assume that all the poles and zeros are real valued. The value of fH – fL (in Hertz) is ____________________
No comments:
Post a Comment